1.      Surface Mount Sump Pump:
Untreated wash-water is introduced into the system via a ¾ HP surface-mount sump pump (included with unit).

2.      Corona Discharge Ozone System:
As the wash-water is pumped into the oil/water/solids separator, it is injected with a high concentration of ozone via a corona discharge ozone injector system for a “quick kill” of live bacteria on contact.

3.      Three-Stage Stainless Steel Tank:
As the water flows through the stainless steel three-stage oil/water/solids separator, it changes the overall flow direction several times as it flows around four vertical baffles. The water is slowed down and fine silt and solids drop to the bottom of the tank.

4.      Oil Coalescing Media:
As the water progresses through hundreds of square feet of honey-combed-shaped meshed oleophilic (oil attracting) coalescing media, it will change directions countless times. In this process, mechanically emulsified oil particles are attracted from the water to the oleophilic media and float to the surface.

5.      Oil Skimmer/Decanter:
Once the oil floats to the water’s surface, it is then skimmed into an oil decanter for easy disposal.

6.   Sloped Solids Trap:
Fine silt and particles are dropped to the bottom of the sloped stainless steel tank for easy flushing and disposal of the accumulated solids.

7.      Discharge Port:
Once the water has been treated, it flows into the final chamber for the stainless steel tank and is gravity fed through a 2” drain line to the sanitary sewer drain in the floor.

8.      Control Panel:
This NEMA-4 rated control box makes the equipment simple to operate and easily accessible.