1.
Surface-Mount
Sump Pump:
Untreated wash-water is
introduced into the system via a ¾ H.P.
surface-mount sump pump (included with system),
located on the unit.
2.
Advanced
Oil/Water/Solids Separator:
As the water
flows through the three stage oil/water/solids
separator, it changes directions countless times
as the water is directed and redirected through
four horizontal baffles, and hundreds of square
feet of honey-comb-shaped meshed oleophilic (oil
attracting) coalescing media. Mechanically,
emulsified oil particles are attracted from the
water to the oleophilic media and float to the
surface. Once on the surface, the oil is skimmed
off into an oil decanter for easy disposal. Fine
salt and particulates are dropped to the bottom
of the sloped stainless steel tank for easy
flushing and disposal of the accumulated
solids.
3.
Corona
Discharge Ozone Injection:
As the
wash-water is pumped into the oil/water/solids
separator, it is injected with a high
concentration of ozone via a corona discharge
ozone injector system for a “quick kill” of live
bacteria on contact.
4.
ORP/pH
Controller:
For longer terms control of
bacteria, the ORP injection system automatically
measures and injects a germicide to control odor
by killing odor-causing bacteria. The automated
pH control system keeps the water at an
appropriate pH level so the germicide is
effective at killing bacteria and controlling
odor.
5.
Customized
Multi-Media Filter:
Once the water has been treated for oil and
solids removal, it is then pushed through a
customized multi-media filter which contains a
special media blend to filter out particulates
larger than 25 microns.
6.
Reusable
Polyester Filter:
Once the larger
particulates are removed, the water is then
filtered through hundreds of square feet of
reusable polyester 20 micron filters.
7.
Activated
Carbon Filter:
The final treatment stage
of the system occurs as the water is filtered
through activated carbon which absorbs
hydrocarbons, herbicides, pesticides, some
metals, and dozens of other carbon based
constituents.
8.
Control
Panel:
This NEMA-4 rated control panel
makes the equipment simple to operate and easily
accessible.
9.
Filter
Pumps:
Located on the edge of the skid
for easy access when maintenance is needed.
10.
Hose
Connectors:
Designed for easy
accessibility and quick installation, the
connections are clearly marked.
11.
Poly
Skid:
Constructed of hardened polymer to
be non-corrosive. It can also be lifted and
moved with a forklift from all four
sides
Proper
Pit System:
(not in picture) Once
equipment is washed, the untreated wash-water
flows into your pit system. Note: a proper pit
system for your application is the first
wash-water treatment step, and a critical part
of any wash-water recycle system.
Consult Mi-T-M Corporation or your local
distributor to determine the pit system that
will work with your application.
Treated Water in Pressurized Conatiner:
Once the water is treated, it is held in a
pressurized container where it will be ready for
reuse at 30 to 50 PSI.
*
Auto Backwash Systems
| 
