| These
Mosmatic Duct Cleaners are great for cleaning Ducts, Trash-Chutes,
Vents, Restaurant Hoods, Tanks and more. The typical restaurant
duct is 8" to 10" in width. The general rule we follow
is choose a duct cleaner that is 65-75% of the width you are
cleaning. The 6"
adjustable nozzle model is the most popular and
universal of our full line of 3",
6", 12",
16", 20"
& 24"
Duct
Cleaners. Each duct cleaner is only 2.8 inches
high (excluding the 3" Duct Cleaner which is 2.4"
high).
All of our
Adjustable Duct Cleaners are available for purchase online with
the option to make them fixed (typically saves you $30+), add
3rd nozzle and the ability to add the optional lifting hook
at a discounted price. We encourge you to read the rest of the
page to get a full understanding on how these great Duct Cleaners
work! If you just need pricing you can click one of the links
below:
So
how do they work? First, the duct cleaners are sold standard
WITHOUT the two meg nozzles that will thread into the adjustable
arms. We can also supply you with these nozzles but we will
need the gallons per minute (GPM) and the pressure (PSI) of
your pressure washer to size the CORRECT nozzles for your duct
cleaner. Otherwise you will have too little flow and/or pressure.
So,
once you have the correct nozzles in your duct cleaner, you
just attach it to the end of your pressure washer hose and drop
it into the duct to be cleaned. Its that easy! Can you image
people still stick their pressure washer wands into the ducts
wasting their time and NOT getting the duct cleaned to an optimal
level?
The
swivel inside spins horizontally. The adjustable nozzles allow
you to position the spray pattern so you actually pass the area
twice! Also, think of it this way... if you are removing gum
from a sidewalk do you aim the water directly on top or do you
tilt it at an ANGLE the help lift the gum off the surface? That's
why you NEED this adjustable model
to lift the grease and gunk off the sides of the duct being
cleaned!
| Here
is the technical information: All of the Mosmatic Duct Cleaners
are made of corrosion-resistant materials and stainless
steel self lubricated bearings. They have new and
improved carbide swivels that offer the highest quality
Swiss made craftsmanship. (really its all about heat resistance
- they were using ceramic seals but they overheated and
cracked on occasion - the carbide seals are a great improvement!)
All Duct Cleaners come with 3/8" NPTF water inlet.
(easily attaches to your standard pressure washer hose).
The Maximum Temperature is 250° F, Maximum Pressure
is 4000 psi and the maximum rpm's of the duct cleaner is
2000 rpm. |
|
The following
are ACTUAL photos taken by us of the 6" adjustable duct
cleaner with two nozzles (part no. MOWA-81.526)
from the top and bottom:
|
